One of the most significant development in the technological world was the introduction of Wi-Fi. Though it’s convenient, it’s usually slower than your broadband internet provider. And it can be frustrating if you are experiencing sluggish loading speeds. Nothing is more irritating than an interruption when you are watching your favorite Netflix movie. To remedy this, we suggest 7 steps to make Wi-Fi more stable at home.
- Find an open free space for the router.
The router should be mounted on a free space without any obstructions. The antenna must be on an elevated vertical position and off the floor for best signals. It should be positioned on the central place in relation to all the access points to ensure uniform coverage throughout the house. Elevation means better distribution signal to all floors
- Restart Wi-Fi system.
After a duration of activity, the Wi-Fi may overheat and slow down especially in overcrowded residential areas. When you experience this, the broadband modem should be switched off and all access points linking to it. Reboot the computer, the access points, the router, and all connected devices. Closing all downloads connections for a while will refresh your network. Unplugging all devices will make it easy for your synchronize with the IP address and remove corrupt packets that may be slowing down the system. This may all that is required for stability and better speeds.
- Shifting channels.
Wireless routers transmit in different frequencies just like radio stations. This can cause congestion and affect Wi-Fi performance particularly in areas with lots of signals using the same channel. Changing channels may assist in reducing overload and reducing interference.
A Wi-Fi analyzer app is also useful since it scans immediate channels and help find less crowded ones. Identifying channels configuration issues around the home which may affect performance is also a worthy idea. Changing channels will drive the router towards the least used networks, thus drastically improving signal strength.
- Replace/add antenna.
Upgrading old antenna with a newer, better version is a sure way of improving signal reception. An internal antenna may need boosting with the use of an external antenna to make Wi-Fi more stable at home. Non- directional antennas are stronger since they receive and send signals in all directions. A high gain antenna allows refocusing Wi-Fi signal towards a place where there is better connection and signal strength.
- Use of a range extender.
A wireless range repeater extends a router’s range and improves reception on dead zones of the home. It should be positioned between the weak points in the house and the router for optimal performance. There are no physical cables required, but they will give a better Wi-Fi range at home. For best results, use different channels for each access point to prevent congestion and signal overlap.
- Upgrade router.
The router wears out after some years. Old routers are not designed to handle so many gadgets at the same time. Replacing an outdated router with a new one is a sure way to make Wi-Fi more stable at home.